Xorg.conf file list

Discussion in 'Linux on Tablet PC Forum' started by Kyle Porter, Mar 4, 2009.

Thread Status:
Not open for further replies.
  1. Kyle Porter

    Kyle Porter Veteran Moderator Senior Member

    Messages:
    1,724
    Likes Received:
    0
    Trophy Points:
    56
    In this thread, i will keep a list of the appropriate xorg.conf file list. This thread is for reference to my install thread.

    Backup Xorg.conf File
    Code:
    sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
    Restore Xorg.Conf File from Failsafe Terminal
    Code:
    sudo cp /etc/X11/xorg.conf.backup /etc/X11/xorg.conf
    Lenovo x61t
    Code:
        # xorg.conf (X.Org X Window System server configuration file)
        #
        # This file was generated by dexconf, the Debian X Configuration tool, using
        # values from the debconf database.
        #
        # Edit this file with caution, and see the xorg.conf manual page.
        # (Type “man xorg.conf” at the shell prompt.)
        #
        # This file is automatically updated on xserver-xorg package upgrades *only*
        # if it has not been modified since the last upgrade of the xserver-xorg
        # package.
        #
        # Note that some configuration settings that could be done previously
        # in this file, now are automatically configured by the server and settings
        # here are ignored.
        #
        # If you have edited this file but would like it to be automatically updated
        # again, run the following command:
        #   sudo dpkg-reconfigure -phigh xserver-xorg
    
        Section "Device"
        Identifier    "Configured Video Device"
        EndSection
    
        Section "Monitor"
        Identifier    "Configured Monitor"
        EndSection
    
        Section "Screen"
        Identifier    "Default Screen"
        Monitor        "Configured Monitor"
        Device        "Configured Video Device"
        EndSection
    
        #BEGIN TABLET SECTION
        Section "InputDevice"
        Driver        "wacom"
        Identifier    "stylus"
        Option        "Device"    "/dev/input/wacom"    # USB ONLY
        Option        "Type"        "stylus"
        Option        "USB"        "on"        # USB ONLY
        Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
        Option        "Button2"    "3"        # Added for stylus click
        EndSection
    
        Section "InputDevice"
        Driver        "wacom"
        Identifier    "eraser"
        Option        "Device"    "/dev/input/wacom"   # USB ONLY
        Option        "Type"          "eraser"
        Option        "USB"           "on"        # USB ONLY
        Option        "ForceDevice"   "ISDV4"        # Tablet PC ONLY
        Option        "Button3"    "2"        # Added for eraser working
        EndSection
    
        Section "InputDevice"
        Driver        "wacom"
        Identifier    "cursor"
        Option        "Device"        "/dev/input/wacom"    # USB ONLY
        Option        "Type"        "cursor"
        Option        "USB"        "on"        # USB ONLY
        Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
        EndSection
    
        # This section is for the TabletPC that supports touch
        Section "InputDevice"
        Driver        "wacom"
        Identifier    "touch"
        Option        "Device"        "/dev/input/wacom"  # USB ONLY
        Option        "Type"          "touch"
        Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
        Option        "USB"           "on"                  # USB ONLY
        EndSection
        #END TABLET SECTION
    
        Section "ServerLayout"
        Identifier    "Default Layout"
        Screen        "Default Screen"
        #    InputDevice    "Synaptics Touchpad"
    
        #added to get tablet working
        InputDevice     "stylus"    "SendCoreEvents"
        InputDevice     "cursor"    "SendCoreEvents"
        InputDevice     "eraser"    "SendCoreEvents"
        InputDevice    "touch"        "SendCoreEvents"
        EndSection
    Compaq 2710p

    Code:
    # xorg.conf (X.Org X Window System server configuration file)
    #
    # This file was generated by dexconf, the Debian X Configuration tool, using
    # values from the debconf database.
    #
    # Edit this file with caution, and see the xorg.conf manual page.
    # (Type "man xorg.conf" at the shell prompt.)
    #
    # This file is automatically updated on xserver-xorg package upgrades *only*
    # if it has not been modified since the last upgrade of the xserver-xorg
    # package.
    #
    # If you have edited this file but would like it to be automatically updated
    # again, run the following command:
    # sudo dpkg-reconfigure -phigh xserver-xorg
    
    Section "InputDevice"
    Identifier "Generic Keyboard"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    EndSection
    
    Section "InputDevice"
    Identifier "Configured Mouse"
    Driver "mouse"
    Option "CorePointer"
    EndSection
    
    Section "InputDevice"
    Identifier "Synaptics Touchpad"
    Driver "synaptics"
    Option "SendCoreEvents" "true"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "HorizEdgeScroll" "0"
    EndSection
    #The following two sections define the wacom hardware
    Section "InputDevice"
    Driver "wacom"
    Identifier "stylus"
    Option "Device" "/dev/ttyS0"# SERIAL ONLY
    Option "Type" "stylus"
    Option "ForceDevice" "ISDV4"# Tablet PC ONLY
    EndSection
    
    Section "InputDevice"
    Driver "wacom"
    Identifier "eraser"
    Option "Device" "/dev/ttyS0"# SERIAL ONLY
    Option "Type" "eraser"
    Option "ForceDevice" "ISDV4"# Tablet PC ONLY
    EndSection
    #"intel" is chosen by default in Hardy
    Section "Device"
    Identifier "Configured Video Device"
    EndSection
    
    Section "Monitor"
    Identifier "Configured Monitor"
    EndSection
    
    Section "Screen"
    Identifier "Default Screen"
    Monitor "Configured Monitor"
    Device "Configured Video Device"
    EndSection
    
    Section "ServerLayout"
    Identifier "Default Layout"
    Screen "Default Screen"
    #InputDevice "Synaptics Touchpad"
    #the following two lines add stylus and eraser support
    Inputdevice "stylus" "SendCoreEvents"# Add these three lines
    Inputdevice "eraser" "SendCoreEvents"
    EndSection 
    Fujitsu t2010
    Code:
    # xorg.conf (X.Org X Window System server configuration file)
    #
    # This file was generated by dexconf, the Debian X Configuration tool, using
    # values from the debconf database.
    #
    # Edit this file with caution, and see the xorg.conf manual page.
    # (Type "man xorg.conf" at the shell prompt.)
    #
    # This file is automatically updated on xserver-xorg package upgrades *only*
    # if it has not been modified since the last upgrade of the xserver-xorg
    # package.
    #
    # If you have edited this file but would like it to be automatically updated
    # again, run the following command:
    #   sudo dpkg-reconfigure -phigh xserver-xorg
    
    Section "InputDevice"
    	Identifier	"Generic Keyboard"
    	Driver		"kbd"
    	Option		"XkbRules"	"xorg"
    	Option		"XkbModel"	"pc105"
    	Option		"XkbLayout"	"us"
    EndSection
    
    Section "InputDevice"
    	Identifier	"Configured Mouse"
    	Driver		"vmmouse"
    EndSection
    
    Section "InputDevice"
    	Identifier	"Synaptics Touchpad"
    	Driver		"synaptics"
    	Option		"SendCoreEvents"	"true"
    	Option		"Device"		"/dev/psaux"
    	Option		"Protocol"		"auto-dev"
    	Option		"HorizEdgeScroll"	"0"
    EndSection
    
    Section "InputDevice"
    	Driver		"wacom"
    	Identifier	"stylus"
    	Option		"Device"	"/dev/ttyS0"
    	Option		"Type"	"stylus"
    	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
    EndSection
    
    Section "InputDevice"
    	Driver		"wacom"
    	Identifier	"eraser"
    	Option		"Device"	"/dev/ttyS0"
    	Option		"Type"	"eraser"
    	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
    EndSection
    
    #Section "InputDevice"
    #	Driver		"wacom"
    #	Identifier	"cursor"
    #	Option		"Device"	"/dev/ttyS0"
    #	Option		"Type"	"cursor"
    #	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
    #EndSection
    
    Section "Device"
    	Identifier	"Configured Video Device"
    EndSection
    
    Section "Monitor"
    	Identifier	"Configured Monitor"
    EndSection
    
    Section "Screen"
    	Identifier	"Default Screen"
    	Monitor		"Configured Monitor"
    	Device		"Configured Video Device"
    EndSection
    
    Section "ServerLayout"
    	Identifier	"Default Layout"
    	Screen		"Default Screen"
    	InputDevice	"Synaptics Touchpad"
            # Uncomment if you have a wacom tablet
            InputDevice     "stylus"        "SendCoreEvents"
    #       InputDevice     "cursor"        "SendCoreEvents"
            InputDevice     "eraser"        "SendCoreEvents"
    
    EndSection
    
    *Confirmed by nomezip under xubutnu. Untested under Ubuntu.
     
  2. Kyle Porter

    Kyle Porter Veteran Moderator Senior Member

    Messages:
    1,724
    Likes Received:
    0
    Trophy Points:
    56
    I will be stopping my Linux project for the next few weeks as i have major items at college to deal with. Thanks for you understanding.

    Remember, if you have any suggestions please post them on the thread. I will still try to update in my Linux-absence.
     
Loading...
Thread Status:
Not open for further replies.

Share This Page