Windows 10 on ep121?

Discussion in 'EP121 Slate' started by Decatro, Oct 7, 2014.

  1. Decatro

    Decatro Pen Pal - Newbie

    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    5
    So!

    Has anyone dared to venture into the realms of Windows 10 yet?
    I'm curious how well it will run on our nifty machine.
     
  2. toom

    toom Pen Pal - Newbie

    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    5
    I have installed it on mine, works great except I can't get touch to work completely. pen is good.
     
  3. jasperwin

    jasperwin Pen Pal - Newbie

    Messages:
    2
    Likes Received:
    1
    Trophy Points:
    5
    I have installed win10 on mine as well. Same issue with touch and pen works fine.
     
  4. Washington Junior

    Washington Junior Pen Pal - Newbie

    Messages:
    5
    Likes Received:
    1
    Trophy Points:
    6
    It's working great here, but I had to install "EETI PCAP MultiTouch Digitizer" driver to make the touch works correctly (replacing the "USB Controller" in Device Manager). This driver can be found in the attachment of this message.

    Cheers!
     

    Attached Files:

    Marty likes this.
  5. CF77

    CF77 Love Tablet. Senior Member

    Messages:
    2,303
    Likes Received:
    8
    Trophy Points:
    56

    how many touch points do you have? with the generic driver
     
  6. Washington Junior

    Washington Junior Pen Pal - Newbie

    Messages:
    5
    Likes Received:
    1
    Trophy Points:
    6
    With the generic driver actually I didn't had any "touch point", because my touch was recognized like a touchpad (moving the mouse cursor) but in a reverse manner (when I touch from bottom to top, the cursor moves down, when touch left to right it was going to left). Also, touching the screen and moving the finger it was like moving a mouse with the left button pressed. To be honest, completely unusable. With the pen it works as usual (because it's another sensor). Installing the same driver as I was using in Windows 8.1 has restored the touch capability and I have two touch points (as I can zoom in and out using a pinch movement).

    Cheers!
     
  7. Bobkyoung

    Bobkyoung Pen Pal - Newbie

    Messages:
    3
    Likes Received:
    1
    Trophy Points:
    6
    I have downloaded your file and extract all files then double click EXC7700_FW, and it seems like a program pops up saying the software is going to... do not touch the screen... something, but nothing happens. Is there other trick I need to do? Please and Thank you.
     
  8. Washington Junior

    Washington Junior Pen Pal - Newbie

    Messages:
    5
    Likes Received:
    1
    Trophy Points:
    6
    I've forgot to mention that you don't need to run the setup. Go to Device Manager, find the USB Controller (next to your mouse) and click to update driver. Select to choose from a device list, then select that you have a disk and point it to the folder you've extracted. It should find a device named "EETI PCAP MultiTouch Digitizer" and it may ask if you really want to install this driver, and you should confirm. These were the steps I remember doing, but I can give more details later when I get home.

    Cheers!
     
  9. jasperwin

    jasperwin Pen Pal - Newbie

    Messages:
    2
    Likes Received:
    1
    Trophy Points:
    5
    Thanks Washington Junior, that worked great.
     
    Washington Junior likes this.
  10. Bobkyoung

    Bobkyoung Pen Pal - Newbie

    Messages:
    3
    Likes Received:
    1
    Trophy Points:
    6
    Thank you! It worked out very nicely!
     
    Washington Junior likes this.
Loading...

Share This Page