Discussion in 'Samsung' started by Steve S, Oct 12, 2011.
Check out the G Tip from Radio Shack. It may fit the Targus too.
Appreciate it but the Targus I have uses an entirely different design to connect the tips:
More of a squared off connector. Maybe I'll be able to use the details of the G tip to find something that fits though.
Edit: Looks like maybe the G tip fits the EP121 as well. Unfortunately, Targus says the EP121 is not compatible with my charger.
While it may be presumptious. How about changing chargers to the Kensington.
That's not going to happen, the Targus one I have is really small and thin and goes directly into the wall. The Kensington ones I've seen are all large bricks. If I'm going to carry a brick around, might as well just carry the Samsung one.
Thanks for the help though, it's appreciated.
In a separate thread, there's been confirmation that the dock doesn't come with a 2nd AC adapter.
Has anyone purchased a second AC adapter (including universal adapters) and confirmed it works with the S7S?
If so, please post the specific model number for the adapter (and compatible tip)...
I got mine Slate at the PDC Build conference from Microsoft, it came with the bluetooth keyboard and docking station square. One power supply...
I am also looking for a replacement and may have found it, but I am unsure of the connector..
40w Samsung Liteon PA-1400-24 AC Adapter charger
Output:40w 19v 2.1a 5.5mm*3.4mm
So any help, also waiting on a tilt case nothing is available.
<<...Output:40w 19v 2.1a 5.5mm*3.4mm...>>
Code: Did you read the root posting in this thread? If so, you would have seen that the dimensions of the DC plug are 3mm OD, ~1mm ID and length of 8mm.
It appears that the AC adapter that you are looking for is PA-1400-14...
It does not come with another adapter
So much for having one at work, one at home
Found this according to bobp's specs:
Samsung PA-1400-14 19V 2.1A 40W 5.5mm*3.0mm Laptop AC Adapter
I went ahead and ordered one. We'll see if it works...if it comes.
Yea, and yes I agree it does not look like this is going to fit. The tip is really small as compared to the numerous other adapters I have laying around. I found a couple that were really close, it would go in a little, but the ID was still to big. Anyway since the tablet/slate is now being sold the adapter will be sourced by someone.
Separate names with a comma.