New Asus Drivers for 810 2-20-13

Discussion in 'Asus' started by swagner53, Feb 20, 2013.

Thread Status:
Not open for further replies.
  1. twism8282

    twism8282 Pen Pal - Newbie

    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    5
    Finally got the update. After mucking with the live update download and log folder I think I corrupted something so I couldn't install the update even when I downloaded it from POST#3. Long story short, I ended up doing a "reset windows to default", and then liveupdate updated to 1.19, and grabbed the update no problem. Hopefully the rest of you have better luck. I'm off to enjoy my vivotab ...hopefully with no more major issues.
     
  2. mm289

    mm289 Tablet Business User

    Messages:
    35
    Likes Received:
    0
    Trophy Points:
    15
    Log entries are as follows:
    [ASUS Driver Install Start]
    22/02/2013 1:37:54.64

    Install Intel Driver Start ...
    Insatll Inter Drive Done with 9009

    Error happened during Driver Packing Installing!!
    22/02/2013 1:37:54.91
    [ASUS Driver Install End]

    Guessing I might have to do a full restore and start again....

    MM
     
  3. Breed

    Breed Scribbler - Standard Member

    Messages:
    218
    Likes Received:
    4
    Trophy Points:
    31
    Perhaps. There'll be a log from the Intel installer next to it. It'll give you a more detailed description of the error.
     
  4. beachman

    beachman Pen Pal - Newbie

    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    5
    Today I had my first hung after sleep with the new drivers :(. After pressing the Power button 4 sec. the tablet started, but trackpad was dead and even the touch! The only thing that worked was the keyboard, I even tried dock and undock without success! This is even worse than Before the update. At least touch Always worked with the older drivers.

    I starting to get really bored with this piece of c**t. Wating 3 month for driver update, and when it comes it's not working:mad:.

    I Always been an PC fan before, but maybe I should just throw this garbage away and go and buy an "sheap" IPad insted, I can't remember when my 1 gen IPad hung last time!

    Sorry for bad English...
     
  5. vadimpelau

    vadimpelau Scribbler - Standard Member

    Messages:
    107
    Likes Received:
    0
    Trophy Points:
    31
    I had hanging issues before this, esp. when I was adding new language packs without rebooting, windows updates have also caused such issues too and my Laptop sometimes does this when plugging in an SD card. I can not help the feeling that Windows 8 was mighty rushed to the market but things are starting to look up... slowly.

    @beachman
    Why did you get a windows tab in the first place if you think an iPad can do? Then again comparing it to a 1gb OS that relies 90% on web apps and still can't multitask is not exactly fair but since it's made by Apple I'm frankly surprised it didn't freeze or stop working for you.
     
    Last edited: Feb 22, 2013
  6. mm289

    mm289 Tablet Business User

    Messages:
    35
    Likes Received:
    0
    Trophy Points:
    15
    Well, did a quick restore and still no connection with Live Update,

    Then did a full restore, deleting everything took about 40 mins to re-build. Guess what - still no connection :mad:-

    Have tried deleting logs, dropping zip file into download and running live update - no luck

    Have tried running the install file direct as admin - nope.

    Running out of ideas now :(

    MM
     
  7. vadimpelau

    vadimpelau Scribbler - Standard Member

    Messages:
    107
    Likes Received:
    0
    Trophy Points:
    31
    Have you tried another router or access point?
    Maybe the update service is down again.

    You could run the update manually but I couldn't tell you with what .bat/.exe to start it since if haven't tried that myself, but if you read back a little someone mentioned it.
     
  8. Breed

    Breed Scribbler - Standard Member

    Messages:
    218
    Likes Received:
    4
    Trophy Points:
    31
    It's the install.cmd that needs to be run. Make sure you right click it and run it as Administrator! That's what LiveUpdate executes:

    Code:
    REM=======================================================
    REM Step1. Start Record
    REM=======================================================
    echo [ASUS Driver Install Start] >>C:\Windows\Logs\ASUSDriverInstall.log
    echo %date% %time% >>C:\Windows\Logs\ASUSDriverInstall.log
    
    REM=======================================================
    REM Check Intel Driver Package Version and Update
    REM=======================================================
    echo.>>C:\Windows\Logs\ASUSDriverInstall.log
    reg query HKLM\SOFTWARE\Intel\SOCPackageInfo /v VersionNumber | findstr "0x35"
    if %errorlevel%==0 goto SkipIntel
    
    echo Install Intel Driver Start ...>>C:\Windows\Logs\ASUSDriverInstall.log
    cd .\CLV_Master_Installer_V1.0
    setup -s -report C:\Windows\Logs
    set errorcode=%errorlevel%
    cd ..
    echo Insatll Inter Drive Done with %errorcode% >>C:\Windows\Logs\ASUSDriverInstall.log
    if %errorcode% neq 3010 goto ErrorInstall
    goto IntelDone
    
    :SkipIntel
    echo Intel Driver does not need update!!>>C:\Windows\Logs\ASUSDriverInstall.log
    
    :IntelDone
    
    REM=======================================================
    REM Check Sensor Hub Version and Update
    REM=======================================================
    echo.>>C:\Windows\Logs\ASUSDriverInstall.log
    cd .\Firmware\STMicroSensorHubTool_V1.0.0.10
    STMicroSensorHubTool.exe /getinfo | findstr /c:"Current Version" | findstr "17"
    if %errorlevel% neq 0 goto UpdateSensor
    
    echo Sensor Hub Firmware does not need update!!>>C:\Windows\Logs\ASUSDriverInstall.log
    
    goto SensorDone
    
    :UpdateSensor
    
    STMicroSensorHubTool.exe /update STM32F103_HIDoverI2C_ST_Reference_V0017.hex
    set errorcode=%errorlevel%
    echo Sensor Hub Firmware Update with %errorcode% >>C:\Windows\Logs\ASUSDriverInstall.log
    if %errorcode% neq 0 goto ErrorInstall
    
    :SensorDone
    cd ..\..
    
    
    REM=======================================================
    REM Check Digitizer BootLoader Version and Update
    REM=======================================================
    echo.>>C:\Windows\Logs\ASUSDriverInstall.log
    cd .\Firmware\Digitizer
    
    del W92BLFW8.log /f
    W92BLFW8-v02.exe -s -v -dump
    findstr /c:"0x0025" W92BLFW8.log
    if %errorlevel% neq 0 goto UpdateDigitizerBootLoader
    
    echo Digitizer BootLoader does not need update!!>>C:\Windows\Logs\ASUSDriverInstall.log
    
    goto DigitizerBootLoaderDone
    
    :UpdateDigitizerBootLoader
    
    W92BLFW8-v02.exe -s -F2
    set errorcode=%errorlevel%
    echo Digitizer BootLoader Update with %errorcode% >>C:\Windows\Logs\ASUSDriverInstall.log
    if %errorcode% neq 0 goto ErrorInstall
    
    :DigitizerBootLoaderDone
    cd ..\..
    
    
    REM=======================================================
    REM Check Digitizer Firmware Version and Update
    REM=======================================================
    echo.>>C:\Windows\Logs\ASUSDriverInstall.log
    cd .\Firmware\Digitizer
    
    del WFlashUSB.log /f
    WFlashI2C-v04.exe -s -v -dump
    findstr /c:"0x2172" WFlashUSB.log
    if %errorlevel% neq 0 goto UpdateDigitizerFirmware
    
    echo Digitizer Firmware does not need update!!>>C:\Windows\Logs\ASUSDriverInstall.log
    
    goto DigitizerFirmwareDone
    
    :UpdateDigitizerFirmware
    
    WFlashI2C-v04.exe -s -F2 W9002_2172.hex
    set errorcode=%errorlevel%
    echo Digitizer Firmware Update with %errorcode% >>C:\Windows\Logs\ASUSDriverInstall.log
    if %errorcode% neq 0 goto ErrorInstall
    
    :DigitizerFirmwareDone
    cd ..\..
    
    REM=======================================================
    REM Register Current Pacakge Version
    REM=======================================================
    echo.>>C:\Windows\Logs\ASUSDriverInstall.log
    echo Write TF810C Driver Package Version: >>C:\Windows\Logs\ASUSDriverInstall.log
    reg import Driver.reg
    reg query HKLM\Software\ASUS\Driver >>C:\Windows\Logs\ASUSDriverInstall.log
    goto InstallDone
    
    REM=======================================================
    REM Register Current Pacakge Version
    REM=======================================================
    :ErrorInstall
    echo.>>C:\Windows\Logs\ASUSDriverInstall.log
    echo Error happened during Driver Packing Installing!!>>C:\Windows\Logs\ASUSDriverInstall.log
    
    REM=======================================================
    REM End Record
    REM=======================================================
    :InstallDone
    echo %date% %time% >>C:\Windows\Logs\ASUSDriverInstall.log
    echo [ASUS Driver Install End] >>C:\Windows\Logs\ASUSDriverInstall.log
    You can see it runs everything contained within the .zip. All of the .exe's it runs with the '-s' argument so you will not see any dialog windows. The best way of checking if it's done is by looking at the log it creates:

    C:\Windows\Logs\ASUSDriverInstall.log

    If it's installed successfully, restart your Tablet :)

    EDIT: Also note that if you have the keyboard dock, make sure you connect this before you update your drivers (in any method). It updates the drivers for the touchpad and keyboard, but if it's not connected it won't update the drivers if it doesn't see the device. So dock your tablet first.
     
    Last edited: Feb 22, 2013
  9. beachman

    beachman Pen Pal - Newbie

    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    5
    I Think all the stability issues is connected to driver issues (lets hope it's not hardware), I have run Win8 on my work PC since the release and newer had a singe bluescreen or hung. But ofcource, my work pc does not have connected standby and all the other cool new hardware that this tablet comes with...

    Sorry, I had not eat for I while and was excited over the new drivers and the hung come as an anti climax.
    Yeah, I know I cant compare apples with pears. I really like the idea having a real PC in tablet format, thats why I want a Windows tablet. But my point is that I rather have an simple apple that works then a pear with Everything that does not work.

    The stabaility is better with the newer drivers, Before update the sleep issues happened everytime now i't only happened once for the last 24h, but its faar from rock solid. Lets wait Another 3 months and see if it's getting better ;)...
     
  10. twism8282

    twism8282 Pen Pal - Newbie

    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    5

    After the Asus Live update, I made sure to install the 300mb+ Windows updates as well(took about an additional 1-2 hours of waiting). So far I haven't had any issues. For me, the Sleep issue, went away when Microsoft released the updates last week, but others reported that it didn't help them. If you haven't already, I would at least give it a try before giving it up.
     
Loading...
Similar Threads - Asus Drivers
  1. Luca92
    Replies:
    10
    Views:
    5,157
Thread Status:
Not open for further replies.

Share This Page