St5112?

+ Reply to Thread
Page 1 of 25 1234511 ... LastLast
Results 1 to 10 of 244

Thread: St5112?

  1. #1
    Pen Pro - Senior Member
    Join Date
    Jun 2011
    Posts
    355
    Rep Power
    5

    Default St5112?

    I'm thinking of buying a used beaten 5112 while I wait for something that will be better and cheap enough to be worth buying, are they reasonably decent machines? I was hoping for something smaller and lighter but I just can't see paying more than $500 for less than netbook performance and the Android devices do not have some of the things I want like a real office suite, ability to connect RS232 devices, etc.

    Is it easy to get inside the 5112 to replace the hard drive? I'm pretty sure that newer drives are faster and use less energy, I might also go with an SSD to again reduce heat and energy consumption (if I can get one cheap enough).

    If you see the recurring theme of cheap, I don't want to spend too much money on this because I now there will be good device coming and I don't want too much money to be a waste when those better device arrive. The Q550 was close but way too much money, if it was under $500 I would have probably bought it already.

    Also if I buy one, would anyone that has a 5112 be kind enough to copy the restore disk? None of the ebay devices come with disks and while a plain install is normally better, it is nice to have the restore disk available if something doesn't work correctly.

  2. #2
    Pen Pro - Senior Member
    Join Date
    Aug 2007
    Posts
    124
    Rep Power
    7

    Default Re: St5112?

    I'm using an ST5111 right now, U7600, 2 GB RAM, Atheros A/B/G, bluetooth, IR, 9 cell extended battery. The back is a kind of felt on panels with tiny screws. There's a panel to remove to get to the HDD, and another for the RAM, making it very easy to upgrade.

    The HDD is most of the noise when in power saver mode. Swapping an SDD will make it quieter, faster, and feel more solid because you can toss it around a little without a spinning drive being upset. It feels a little heavy though, so you probably won't move it as much as one would a light pad of paper.

    Windows 7 runs fine. I was primarily using a Core i7 before this, and I don't feel that irritating drop in performance going to the Stylistic for web browsing and small apps. I usually even keep it in power saver mode, and switch to balanced for CPU intensive processes to hurry up.

    Windows experience index is 3.8 for CPU, 4.3 for RAM, 3.4 for graphics. The Q550 is said to have 2.0 for CPU.

    With 9-cell battery, I don't worry about it much. It varies, but probably runs for 5 hours and more. When it's fully charged the estimated time remaining is some big number, like 6-9 hours. It's variable but lasts long enough to do things away from an outlet.

    It's actually probably the best slate you can get for under thousands of dollars now. The main problem is, the screen is not LED backlit. If it were, I'd rather have it than an EP121. It's also just thicker and heavier than the super-thin iPads of today. But there's physical buttons on the side that are handy for paging through web pages, pen silo and tether, dual mics, ethernet, video out, etc. It's a full laptop, in slate form.

    I'd much rather have a TabletKiosk i500, or Samsung 700T. The 700T should be in people's hands by November, possibly sooner. Maybe you should just wait for that. It will do most of what the ST5112 can, but with upgraded components, SSD, LED, thinner, lighter, PLS TFT, etc.

    I can send you the OS restore disc, but my "Drivers and Apps" disc says "Reject" on the data side, so I don't think it'd work if I tried. That stuff in latest versions should be on their downloads site.

  3. #3
    Pen Pro - Senior Member
    Join Date
    Jun 2011
    Posts
    355
    Rep Power
    5

    Default Re: St5112?

    Thanks, still trying to decide if I want one of these or not. I have a u810 but reading documents on it gets a little tiring because of the small screen. If the Acer 500w or MSI 110w was a little cheaper they would work for me.

  4. #4
    Pen Pro - Senior Member
    Join Date
    Jun 2011
    Posts
    355
    Rep Power
    5

    Default Re: St5112?

    OK, how about this...

    Is there a way to get the buttons working with Linux? I'm thinking Fedora15 and wondering how much works and how much does not.

  5. #5
    Pen Pro - Senior Member
    Join Date
    Jun 2010
    Location
    Chicago IL
    Posts
    5,376
    Rep Power
    32

    Default Re: St5112?

    After owning and using a small variety of devices I can tell you this:
    -Pen based devices are serious work horses that should be able to tackle most things you can throw at them, and they will keep on ticking after pulling a few hits (its mostly that they were designed to be very solid devices, and that the $1500-3,000 price tag was justified -sorta), and buying one of these used is like buying yourself a used tank, sure it may be a little rusted and it isn't in perfect condition, but with a little care and perhaps a minor overhaul you will have humming along in no time, and it will likely stay that way for a few years
    -Touch based devices (ie: touch screen only, no active digitizer pens: like the W500, and 110w) if all you want to do with it is: browsing the Internet, music, reading some PDF's, movies, small games, a tiny bit of productivity, and not much more then this is the device, but anything more (especially handwriting anything) then get yourself a pen based device! Touch input is truly overrated, cumbersome, and very, very...very... tiresome after a short amount of time

    Though you can get a device that has the active digitizer pen and a touchscreen together, they do work well when switching between pen and touch



    I say take the plunge and get yourself a used pen based device from ebay using paypal (with paypal you have ~40 days in which you can initiate a full refund if the product is not as it was claimed to be, and the seller is refusing a refund outright -though, usually they will just refund your full amount as long as you ship it back to them as you got it- so with that and more, you have quite a bit of 'buyer protection' if things go pear shaped)... so, it would be cheap, have almost zero risk, and be a very solid device, don't know how much more you can ask for.


    With Linux anything is possible, it just depends on your personal knowledge of how to do tings in Linux, and on the Internet articles on how to do things... but you should be able to get close to 98% of things working as well as they would in Windows 7... buttons should be very easy, all you are doing is adding a line of text that makes the OS recognize a otherwise unrecognized input as something you specify


    A SSD will make a word of difference on the older machines, get yourself a 64GB or larger SSD from Intel, Crucial, or Samsung, all the rest should be best avoided (especially OCZ, and Kingston)
    Current: HP 2730p Win 7 & Linux Mint | Toshiba M4 | Motion M1400 renice 120GB SSD | ITRONIX IX-325 | Motion F5 (U7500 update) | Fujitsu P1620 | T4220 w/SXGA+ 160GB Intel X18-M & 1TB HDD in bay | broken TC4400 [for experimentation] | i5 3570K mITX desktop w/GTX460 | ASUS N10j
    Gone but not Forgotten: HP Tm2 | HP Slate 500 | HP touchpad 32GB | 6-core desktop

  6. #6
    Pen Pro - Senior Member
    Join Date
    Aug 2011
    Posts
    100
    Rep Power
    3

    Default Re: St5112?

    i have had a fujitsu st 5112 for 2 years now,
    and swear by it. compared to a motion computing le1600,
    tc 1100 etc. it is easily the fastest, most affordable
    tablet for its price+performance range.

    they are easily expandable, and have tons of
    ports and connectors. the 5111 has a 10.4" screen
    but the same form factor as this 12" one.

    definitely worth checking out.

    later
    -1

    [---------------------------------]
    [microsoft surface pro 128g-------]
    [Fujitsu 5112 Stylistic ----------]
    [HP TC1100 -----------------------]
    [nokia n810->Nec Versa Litepad----]
    [Motion Computing LS 800 ---------]
    [---------------------------------]

  7. #7
    Pen Pro - Senior Member
    Join Date
    Jun 2011
    Posts
    355
    Rep Power
    5

    Default Re: St5112?

    I will not ever willingly buy Kingston, they will find any way possible out of their published warranty!

  8. #8
    Pen Pro - Senior Member
    Join Date
    Jun 2011
    Posts
    355
    Rep Power
    5

    Default Re: St5112?

    $205 later and it should hopefully ship tomorrow. Now the question is which memory upgrade?
    Newegg.com - Mushkin Enhanced Essentials 4GB (2 x 2GB) 200-Pin DDR2 SO-DIMM DDR2 667 (PC2 5300) Dual Channel Kit Laptop Memory Model 996618
    Newegg.com - G.SKILL 4GB (2 x 2GB) 200-Pin DDR2 SO-DIMM DDR2 667 (PC2 5300) Dual Channel Kit Laptop Memory Model F2-5300CL4D-4GBSQ

    Both are CAS latency 4 which if my memory is correct is better than 5, or should I just go for Corsair or Crucial which is CAS 5?

    SSD will probably have to wait until I find a decent one cheap, funny enough when I was on the Crucial site and checked the SSD box, the only thing they showed me was an $860 512GB drive... Why on Earth would anyone pay that much for an SSD, the speed can not be that important if you are expecting to use that much storage. 128GB I could see, but not 512GB.

    I may need help finding drivers to get Win7 64bit running if I can't get Fedora working to my satisfaction.

  9. #9
    Pen Pro - Senior Member
    Join Date
    Aug 2007
    Posts
    124
    Rep Power
    7

    Default Re: St5112?

    I seem to remember there's some info on the web about getting Fujitsu buttons working with Linux. I didn't bother and mostly ran Windows 7 because Linux distros lack all the pen-oriented navigational features Windows does, and the on-screen keyboards were poorly designed, so you end up needing a keyboard most of the time.

    Windows 7 64bit drivers are found in Fujitsu's support downloads for newer machines, like the LifeBook convertibles from around the same time. It takes some trial and error to get the right combinations.

    I wouldn't worry about the difference in CAS latency, go for whatever is cheapest. But you might want to wait to check it out. If it already has a chip it might be better to just fill the other slot.

  10. #10
    Pen Pro - Senior Member
    Join Date
    Jun 2011
    Posts
    355
    Rep Power
    5

    Default Re: St5112?

    It only has 1GB installed which is not enough, 4GB seemed to be mostly full with win7 64bit on my laptop.

    The newest Fedora has Wacom drivers and supposed to have things like handwriting recognition, something about being part of gnome 3.x

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -5. The time now is 10:54 AM.
Powered by vBulletin® Version 4.2.2
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.1