http://forum.tabletpcreview.com/ Fujitsu offers outstanding quality and support along with some of the best in convertible and slate Tablet PCs. Talk about Fujitsu tablets here. en Sun, 26 May 2013 00:50:39 GMT vBulletin 60 http://forum.tabletpcreview.com/images/styles/TabletPCReview/misc/rss.png http://forum.tabletpcreview.com/ http://forum.tabletpcreview.com/fujitsu/57020-t902-32-bit-worth-getting.html Sat, 25 May 2013 16:58:56 GMT I just passed up an ebay auction for the T902 that had a buy now for $900. It sold for $830. I was tempted but did not know if the 32 bit version was worth going for. I just passed up an ebay auction for the T902 that had a buy now for $900. It sold for $830. I was tempted but did not know if the 32 bit version was worth going for. ]]> Fujitsu michaelws http://forum.tabletpcreview.com/fujitsu/57020-t902-32-bit-worth-getting.html http://forum.tabletpcreview.com/fujitsu/56953-question-any-p1610-p1620-owners-2gb-ram.html Tue, 21 May 2013 00:02:41 GMT I just purchased a non-Fujitsu branded 2GB microdimm for my P1610. So far it seems to work well, but CPU-Z says it's only running at 199.5 Mhz despite being labeled as PC-4200 (which means it should be running at 266 Mhz)

My Fujitsu OEM 1GB RAM runs at 266 Mhz and I'm not sure if it's running the 2GB module at a slower rate because of the chipset architecture or because this ram is mis-labeled.

Before I start the return process, could someone who has a P1610/20 and 2GB of RAM please tell me what speed CPU-Z says your memory is running at? It'd be in the Memory tab and labeled "DRAM Frequency." If you don't have CPU-Z, it's a small, free program and can be downloaded at CPU-Z

Thanks! ]]> Fujitsu FlyingShawn http://forum.tabletpcreview.com/fujitsu/56953-question-any-p1610-p1620-owners-2gb-ram.html http://forum.tabletpcreview.com/fujitsu/56940-how-install-hard-drive-modular-hard-drive-kit.html Mon, 20 May 2013 09:35:46 GMT Hi
I have just purchased a modular hard drive mount kit for a T732. Does anyone know how to open the hard drive bay to install a drive? The plastic is unfortunately quite flimsy and I don't want to force any parts. I paid $49.99 from futjitsu america, I think the parts are worth no more than $10; this does not appear to be a well engineered or simple accessory if I can't even figure out how to open the bay without using force.

Unfortunately I am entering the 7th week of waiting for my T732 to be repaired, so still can't give feedback on what it is like ]]> Fujitsu utopian201 http://forum.tabletpcreview.com/fujitsu/56940-how-install-hard-drive-modular-hard-drive-kit.html http://forum.tabletpcreview.com/fujitsu/56929-t731-t730-screen-difficult-read-text-what-can-i-do.html Sun, 19 May 2013 16:30:51 GMT I am disappointed to my almost brand new T731, T730, (they were barely touched by the previous owner.) Text just looks "not as sharp", a bit feather soft looking when compared to my aging T5010, T4210. I can guess the extra capacitive layer is to blame. If I apply a crystal clear protector, it will produce the mirror effect which I don't want. What else can I do? ]]> Fujitsu tpc2000 http://forum.tabletpcreview.com/fujitsu/56929-t731-t730-screen-difficult-read-text-what-can-i-do.html http://forum.tabletpcreview.com/fujitsu/56901-q702-windows-8-windows-7-experience.html Fri, 17 May 2013 10:45:44 GMT Just wanted to share my Windows installation experience when reverting from Windows 8 to Windows 7 in the hope of helping anyone else who has driver/utility problems. I had been asked by a colleague to do the reversion as a Windows 7 environment was necessary to develop an app for a company using... Just wanted to share my Windows installation experience when reverting from Windows 8 to Windows 7 in the hope of helping anyone else who has driver/utility problems.
I had been asked by a colleague to do the reversion as a Windows 7 environment was necessary to develop an app for a company using Q702s on Win 7.
Installed windows 7 ok and downloaded all the drivers/utilities for 64 bit Windows 7 and installed them in order once all my Windows 7 updates were completed. Autorotation refused to work - received an error about the Button software being loaded incorrectly or I wasn't using a tablet but a normal PC. Spent a long time trying various things to fix this i.e. a lot of loading/unloading software & drivers and rebooting in between but no joy there.
In desperation I looked at the supplied Windows 8 utilty disk and ran the setup. The software on there includes a utility to check your tablet online and suggest any drivers/utilities you need and installs them so I uninstalled all my currently loaded utilities ran this software and the tablet was fully functioning!
Did notice some registry fixes being downloaded which don't appear on the Fujitsu download page so can't help thinking that I wouldn't have been able to get the thing going without this download utility.
So anyone doing the same thing I would recommend just installing the network driver first and then let this software do its thing! Will save you a whole lot of time.. ]]> Fujitsu ade http://forum.tabletpcreview.com/fujitsu/56901-q702-windows-8-windows-7-experience.html http://forum.tabletpcreview.com/fujitsu/56882-t902-buttons.html Wed, 15 May 2013 22:28:31 GMT Hi, does anyone know how to map the tablet buttons to the keyboard, I need it to be able to rotate my canvas in art programs. Also would like to hear how you guys have your tablet setup in programs like sketchbook and photoshop. Hi, does anyone know how to map the tablet buttons to the keyboard, I need it to be able to rotate my canvas in art programs.
Also would like to hear how you guys have your tablet setup in programs like sketchbook and photoshop. ]]> Fujitsu lemonadebox http://forum.tabletpcreview.com/fujitsu/56882-t902-buttons.html http://forum.tabletpcreview.com/fujitsu/56859-t4220-windows-7-installed-problems.html Tue, 14 May 2013 19:32:36 GMT Hi, fellas!
I'm new here but I hope I will find my answer[s] for my problems.
So, to get started: I've bought a T4220 [second-hand] that has 160Gb HDD, it's @2.4Ghz and it also has a 1400x1050 dpi screen resolution. It came preloaded with Tablet XP so I decided to install Windows 7 Ultimate x32.
Everything was OK [it was a fresh install] and after the OS was loaded I have started to install the Fujitsu drivers in this order:
1) Fujitsu System Extension Driver: FUJ02E3
2) Fujitsu System Extension Utility
3) Video
4) Audio
5) Fujitsu HotKey Driver Driver: FUJ02B1
6) Fujitsu Hotkey Utility
7) Button Driver
8) Button Utilities
9) LAN
10) Media Slot
11) Modem
12) Pen
13) Pointing (Synaptics)
14) WLAN (Intel)
15) Fingerprint Driver
16) Fujitsu Mobility Center
17) Fujitsu Shock Sensor
18) Infrared
19) Fujitsu Security Panel (Supervisor)
20) Fujitsu Security Panel (User)

But after I have finished I have noticed that:
1. my screen resolution stays [by default] at 1024x768 dpi and I have to raise it by myself at 1400x1050 dpi
and
2. everytime I rebut/restart/start my machine I get this message: "Fujitsu Shock Sensor is blocked due the compatibility issue"...

PLEASE, what should I do to solve these problems?


THANK YOU! ]]> Fujitsu mulea http://forum.tabletpcreview.com/fujitsu/56859-t4220-windows-7-installed-problems.html http://forum.tabletpcreview.com/fujitsu/56855-t902-upgrading-ram-ssd.html Tue, 14 May 2013 15:25:19 GMT Hi, i just ordered me some shiny T902, and have some questions on upgrading it. *RAM* First things first. Already know it fits 2modules 16gigs total of 1600MHz DDR3 SODIMM. Questions: * Voltage. Standard 1.5v or 1.35v. Which does it work with and how longer battery life with 1.35v... Hi, i just ordered me some shiny T902, and have some questions on upgrading it.

RAM
First things first. Already know it fits 2modules 16gigs total of 1600MHz DDR3 SODIMM.
Questions:

• Voltage. Standard 1.5v or 1.35v. Which does it work with and how longer battery life with 1.35v modules.
• CL. And timings in general. Again, which will work? Most interest in info on CL9.
• some success stories anyone?

SSD
Questions:

• controller preference. Any positive feedback on Marvell controllers? Plextor M5P anyone?
• SATA generation. Only SATA I for the modular bay? Which gen main rack?
• Form factor. 2.5", 9mm high for main rack and only 7mm for modular bay?
• some success stories anyone?

]]> Fujitsu Ander http://forum.tabletpcreview.com/fujitsu/56855-t902-upgrading-ram-ssd.html http://forum.tabletpcreview.com/fujitsu/56826-q702-owner-can-someone-tell-me-your-registry-settings-touch.html Sun, 12 May 2013 20:49:42 GMT Would someone with a Q702 mind taking a look at this registry key and tell me what settings you have? Here are mine: HKEY_CURRENT_USER\Software\Microsoft\Wisp\Touch Bouncing (1) Friction (1) Inertia: (50) PanningDisabled (0) TouchGate (1) TouchMode_hold (1) Would someone with a Q702 mind taking a look at this registry key and tell me what settings you have? Here are mine:

HKEY_CURRENT_USER\Software\Microsoft\Wisp\Touch

Bouncing (1)
Friction (1)
Inertia: (50)
PanningDisabled (0)
TouchGate (1)
TouchMode_hold (1)
TouchModeN_DtapDist (50)
TouchModeN_DtapTime (50)
TouchModeN_HoldTime_Animation (50)
TouchModeN_HoldTime_BeforeAnimation (50)
TouchUI (0) ]]> Fujitsu elee532 http://forum.tabletpcreview.com/fujitsu/56826-q702-owner-can-someone-tell-me-your-registry-settings-touch.html http://forum.tabletpcreview.com/fujitsu/56811-q702-scrolling-slow-jerky-compared-surface.html Sat, 11 May 2013 13:19:48 GMT The scrolling on my Q702 has much less acceleration and its kind if jerky she compared to the Surface (tried both RT and Pro). If I flick a webpage or scroll across the Start Menu, it requires multiple flicks on the Q702, versus one quick flick on the Surface. I did a fresh install of Windows 8... The scrolling on my Q702 has much less acceleration and its kind if jerky she compared to the Surface (tried both RT and Pro). If I flick a webpage or scroll across the Start Menu, it requires multiple flicks on the Q702, versus one quick flick on the Surface. I did a fresh install of Windows 8 on a Q702 that originally came loaded with Windows 7... maybe I missed a driver or something? ]]> Fujitsu elee532 http://forum.tabletpcreview.com/fujitsu/56811-q702-scrolling-slow-jerky-compared-surface.html http://forum.tabletpcreview.com/fujitsu/56808-q702-lowest-screen-brightness-setting-totally-black-does-q702-also-do.html Sat, 11 May 2013 13:04:29 GMT If I adjust my screen bright slider all the way down, the screen goes completely black? Is this normal? I've now done it on accident a few times, and the solution has been to boot into safe mode, raise the brightness level, and reboot. ]]> Fujitsu elee532 http://forum.tabletpcreview.com/fujitsu/56808-q702-lowest-screen-brightness-setting-totally-black-does-q702-also-do.html http://forum.tabletpcreview.com/fujitsu/56804-q702-clean-windows-8-install-questions.html Fri, 10 May 2013 22:48:38 GMT Anyone done a clean install of Windows 8 on a Q702? I'm not able to get display brightness working correctly, scrolling is kind of slow, and volume buttons are not working. I would appreciate any tips for getting the right drivers and other tips for building a Win 8 image on the Q702 from scratch. Thanks! ]]> Fujitsu elee532 http://forum.tabletpcreview.com/fujitsu/56804-q702-clean-windows-8-install-questions.html http://forum.tabletpcreview.com/fujitsu/56768-t902-jack-loose-inside-socket.html Thu, 09 May 2013 15:17:13 GMT Hi Guys,

I just received my T902. It's fantastic, but I noticed that when the A/C adapter jack is plugged into the computer there is significant play up and down, side to side when I wiggle the adapter. In other words the adapter feels loose while plugged into the notebook.

Is this a design feature or do I have a loose jack inside my computer already? Any feedback would be appreciated. ]]> Fujitsu Tab Rocker http://forum.tabletpcreview.com/fujitsu/56768-t902-jack-loose-inside-socket.html http://forum.tabletpcreview.com/fujitsu/56748-q702-funitsu-folio-case-questions-other-case-options.html Wed, 08 May 2013 10:15:16 GMT Anyone have general opinions on the Q702 Folio case? Can the Q702 be placed in the keyboard dock while in the Folio? Does it add a lot of weight/bulk? When using the Fujitsu Folio with Bluetooth keyboard, is it stable/easy to use on your lap? Are there any other recommended portfolio... Anyone have general opinions on the Q702 Folio case?

Can the Q702 be placed in the keyboard dock while in the Folio?

Does it add a lot of weight/bulk?

When using the Fujitsu Folio with Bluetooth keyboard, is it stable/easy to use on your lap?

Are there any other recommended portfolio style cases aside from the one sold by Fujitsu? ]]> Fujitsu elee532 http://forum.tabletpcreview.com/fujitsu/56748-q702-funitsu-folio-case-questions-other-case-options.html http://forum.tabletpcreview.com/fujitsu/56747-t902-help-pls.html Wed, 08 May 2013 03:16:29 GMT Hi guys i just got my t902 refurb from ebay a few days ago and im in love with it but I'm having some problems, if anyone can help me with them itd be great.
My specs are : i5 model, 256 gb ssd, 8gb ram, windows 7 64bit

I upgraded from 32 bit to 64 bit after the clean install some of the drivers i got from the fujitsu website werent working, the buttons on the tablet doesnt respond, and the auto rotation doesnt work either. Does finger zooming work in windows 7 on the website their are drivers for it only for windows 8.

Is anyone else here gaming on their t902, I mostly only league and it is having some problems running it. For the most part my fps in game is stable around 50 fps, but when some effects are used in game, my fps shoots down to 10-12. I really dont understand why this is happening, my older laptop a fujitsu lh532 runs league completely fine at high settings, but my t902 doesnt seem to be able to handle it.

Other than that im loving it, still getting used to drawing on screen. ]]> Fujitsu lemonadebox http://forum.tabletpcreview.com/fujitsu/56747-t902-help-pls.html