Wacom Enhanced Driver Penable Device

[kurt_hectic]

1)
rjmauer, for now check this out, i cannot help better becouse i also havnt got "wacom usb isd".

after you install ISD_DualTouch_702-18_web do "Z step" for whatever you get in device manager, i had "wacom pen". Simply instal driver by hand.

dunno why I cannot use windows calibration, i did it on the new panel "Pen Tablet Properties" and its OK for now. I will wait for some update from other users.

2)
"you will find the extra pen icon in control panel=> "Pen Tablet Properties". do you pen calibration if required. ***setup pen buttons as you wish.***"


CF77- when i install drivers from wacom website (that with BSOD bonus) i can see that it install also virtual hid and virtual pen? sth like that. After your instalation i havnt got extra hid devices, only wacom pen. Maybe this is the problem?

A half of us havnt get "Wacom USB ISD" Sth is wrong.

Please, paste screenshots from device manager before 1st(ISD_DualTouch_702-18_web) and 2nd(driver) correct installation.


***
edit
***

i did it, now its perfect. check this out:

1}i did a full windows update- WITH additional\suggestet update of touch.
2} i used PrefUtil from ISD_DualTouch_702-18_web folder and delete all preferences.
3} i install and uninstall ISD_DualTouch_702-18. WHY? Becouse after windows update installation works different-i got lots of windows pop up becouse installing/unistalling procces was turing on some wacom .exe's. IMO it uninstall some old things and it helps/it install more.
Conclustion-> 2nd and 3rd point its a cleanup.
4}after restart and restoring default drivers {wacom pen}[uninstall old things and search for new devices] {you must have internet connection!!!} i install ISD_DualTouch_702-18. Now i get a virtuals devices,wacom mouse,usb device ect. Now i knew it will be fine.
5}restart pc
6}i install driver for...there was there was 2 similar names in hid section ...i didnt remember what i chose...that was some usb device? cos now i have on device maner 'usb isd' and 'hid pen'. So that other than 'hid pen'.

now i can calibrate correctly-> pen calibration bring that screen from driver so now its only 1 calibration for pen and one for touch. No misunderatanding, no schizofrenic. ;p



'When I go to calibrate now, I only get one point to calibrate with. I touch it with the pen, and no other point appears'

to fix it turn on 'right click' and log off from win. log on an you get 4 points.

ufff. onces again THX

[nheel]

How can we ensure that the USB Hub isn't set to sleep?

Thanks.

[purplepeopledesign]

How can we ensure that the USB Hub isn't set to sleep?

Power management properties within device manager.

:)ensen.

[nheel]

But which one do I check to not turn off when system is asleep? The USB Root Hub or the Generic USB Hub?

Thanks for the reply and the help.

[Crustmilk]

Finally got mine working I did a few things different but so far so good!

[rjmauer]

how did you install the driver into wacom pen by hand?

[Crustmilk]

What I did was uninstall any drivers and ANY folders under C:/drivers that had anything to do with wacom. Rebooted. It defaulted back to "Wacom Pen" I did not have the option from the original post.

Then I installed ISD_DualTouch_702-18. Reboot

I could not find the "USB ISD". So I simply left it. Checked my programs and there I had it pressure...I cannot begin to explain how it worked. Maybe pure luck, touch wood it doesn't fail again :'(

[Crustmilk]

I'd also like to note I did a full Windows Update, all recommended and crucial updates including SP1 before I did anything.

Don't forget RESTORE POINTS!

[kurt_hectic]

hey, check the 1st post...

Crustmilk- check the screenshot- if you havnt got all devices in device manager ITS wrong... spend some more time on this. Read my post, maybe it helps. Only after correct installation you will get a good resoults.

rjmauer- its been posted in 1st post....step by step...(click od the usb device, then drivers, then 'let me choose from hdd' 3rd option, select folder and install) check 1st post.

[rjmauer]

thanks all for the help, i know im knocking in the door. i have everything right, the drivers, the hid's, everythings perfect. i have sensitivity in artrage and onenote and have dbl-click, right click and eraser usage. the ONLY thing thats not working is photoshop sensitivity. c35 64 bit. any ideas or thoughts? honestly, thats why ive been trying to get to work the whole time. again, thanks for the help.